Jeep 2009 COMPASS Owner'S Manual Download

Page: 86 / 439

•

The system will prompt you to say the number you
want to call.

•

For example, you can say

⬙

234-567-8901

⬙

•

The UConnect

威

system will confirm the phone num-

ber and then dial. The number will appear in the
display of certain radios.

Call by Saying a Name

•

Press the PHONE button to begin.

•

After the

⬙

Ready

⬙

prompt and the following beep, say

“Call.

⬙

•

The system will prompt you to say the name of the
person you want to call.

•

After the

⬙

Ready

⬙

prompt and the following beep, say

the name of the person you want to call. For example,
you can say

⬙

John Doe,

⬙

where John Doe is a previ-

ously stored name entry in the UConnect

威

phonebook

or downloaded phonebook. To learn how to store a
name in the phonebook, refer to

⬙

Add Names to Your

UConnect

威

Phonebook,

⬙

in the phonebook.

•

The UConnect

威

system will confirm the name and

then dial the corresponding phone number, which
may appear in the display of certain radios.

Add Names to Your UConnect

威

Phonebook

NOTE:

Adding names to the UConnect

威

phonebook is

recommended when the vehicle is not in motion.

•

Press the PHONE button to begin.

•

After the

⬙

Ready

⬙

prompt and the following beep, say

⬙

Phonebook New Entry.

⬙

•

When prompted, say the name of the new entry. Use of
long names helps the voice recognition and it is
recommended. For example, say

⬙

Robert Smith

⬙

Robert

⬙

instead of

⬙

Bob.

⬙

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2009 COMPASS
























































































































































































































































































































































































































































Search results

Summary of Contents for 2009 COMPASS

Reviews:

Related manuals for 2009 COMPASS

Brands by name

Popular brands

Jeep 2009 COMPASS, Owner'S Manual

Search results

Summary of Contents for 2009 COMPASS

Reviews:

Related manuals for 2009 COMPASS

Brands by name

Popular brands