Jeep 2009 COMPASS Owner'S Manual Download

Page: 399 / 439

60,000 Miles (100,000 km) or 60 Months Maintenance Service
Schedule

❏

Change the engine oil and engine oil filter.

❏

Rotate tires.

❏

Replace the engine air cleaner filter.

❏

Inspect the brake linings; replace if necessary.

❏

Adjust the parking brake on vehicles equipped with four-wheel disc brakes.

❏

Replace the air conditioning filter.

❏

Replace the spark plugs (except 2.4L PZEV).

❏

Replace rear drive assembly (RDA) fluid.

❏

Replace power transfer unit (PTU) fluid.

❏

Change the automatic transmission fluid and filter if using your vehicle for any of the
following: police, taxi, fleet, or frequent trailer towing.

❏

Flush and replace the engine coolant at 60 months if not done at 102,000 miles
(170 000 km).

Odometer Reading

Date

Repair Order #

Dealer Code

Signature Authorized Chrysler Dealer

66,000 Miles (110,000 km) or
66 Months Maintenance
Service Schedule

❏

Change the engine oil and engine oil
filter.

❏

Rotate tires.

Odometer Reading

Date

Repair Order #

Dealer Code

Signature Authorized Chrysler Dealer

MAINTENANCE SCHEDULES

397

T
E

N
A
N
C

S
C
H

D
U

L
E

Summary of Contents for 2009 COMPASS
























































































































































































































































































































































































































































Search results

Summary of Contents for 2009 COMPASS

Reviews:

Related manuals for 2009 COMPASS

Brands by name

Popular brands

Jeep 2009 COMPASS, Owner'S Manual

Search results

Summary of Contents for 2009 COMPASS

Reviews:

Related manuals for 2009 COMPASS

Brands by name

Popular brands