Jeep 2009 COMPASS Owner'S Manual Download Page 258

Page: 258 / 439

To maintain a safe speed and prolong brake life, shift
down to 2nd or 1st gear when descending a steep grade.

When turning a corner or driving up a steep grade,
downshift early so that the engine will not be
overburdened.

AUTOMATIC TRANSAXLE — IF EQUIPPED

NOTE:

The Continuously Variable Automatic Transaxle

(CVT) changes ratios in a continuous manner. This may
sometimes “feel” as if it is slipping, but this is normal and
does not harm anything.

CAUTION!

Damage to the transaxle may occur if the following
precautions are not observed:

•

Shift into PARK only after the vehicle has come to
a complete stop.

•

Shift into or out of REVERSE only after the
vehicle has come to a complete stop and the engine
is at idle speed.

•

Do not shift from REVERSE, PARK, or NEUTRAL
into any forward gear when the engine is above
idle speed.

•

Before shifting into any gear, make sure your foot
is firmly on the brake pedal.

NOTE:

You MUST press and hold the brake pedal down

while shifting out of PARK.

256

STARTING AND OPERATING

Summary of Contents for 2009 COMPASS
























































































































































































































































































































































































































































Search results

Summary of Contents for 2009 COMPASS

Reviews:

Brands by name

Popular brands

Jeep 2009 COMPASS, Owner'S Manual

Search results

Summary of Contents for 2009 COMPASS

Reviews:

Brands by name

Popular brands