Jeep 2009 COMPASS Page 116 Owner'S Manual Download

Page: 116 / 439

Manual Lumbar — If Equipped

The lumbar adjustment handle is located on the outboard
side of the driver’s seat. To increase or decrease support,
rotate the handle up or down.

Driver’s Seatback Recline

To recline:

1. Lean forward before lifting the handle, then lean back
to the desired position and release the handle.

2. Lift the handle to return the seatback to an upright
position.

Lumbar Adjustment

Reclining Seat

114

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2009 COMPASS
























































































































































































































































































































































































































































Search results

Summary of Contents for 2009 COMPASS

Reviews:

Related manuals for 2009 COMPASS

Brands by name

Popular brands

Jeep 2009 COMPASS, Owner'S Manual

Search results

Summary of Contents for 2009 COMPASS

Reviews:

Related manuals for 2009 COMPASS

Brands by name

Popular brands