Jeep 2009 COMPASS Owner'S Manual Download Page 101

Page: 101 / 439

Things You Should Know About Your UConnect

姞

System

UConnect

威

Tutorial

To hear a brief tutorial of the system features, press the
PHONE button and say “UConnect

威

Tutorial.”

Voice Training
For users experiencing difficulty with the system recog-
nizing their voice commands or numbers, the UConnect

威

system Voice Training feature may be used. To enter this
training mode, follow one of the two following proce-
dures:

From outside the UConnect

威

mode (e.g., from radio

mode):

•

Press and hold the VOICE RECOGNITION button for
five seconds until the session begins, or,

•

Press the VOICE RECOGNITION button and say the

⬙

Setup, Voice Training

⬙

command.

Repeat the words and phrases when prompted by the
UConnect

威

system. For best results, the Voice Training

session should be completed when the vehicle is parked
with the engine running, all windows closed, and the
blower fan switched off.

This procedure may be repeated with a new user. The
system will adapt to the last trained voice only.

To restore the Voice Recognition system to factory default
settings, enter the Voice Training session via the above
procedure and follow the prompts.

Voice Recognition (VR)

•

For best performance, adjust the rearview mirror to
provide at least

⁄

in (1 cm) gap between the overhead

console (if equipped) and the mirror.

•

Always wait for the beep before speaking.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2009 COMPASS
























































































































































































































































































































































































































































Search results

Summary of Contents for 2009 COMPASS

Reviews:

Brands by name

Popular brands

Jeep 2009 COMPASS, Owner'S Manual

Search results

Summary of Contents for 2009 COMPASS

Reviews:

Brands by name

Popular brands