Jeep 2008 Wrangler Owner'S Manual Download | Manualshive

Page: 152 / 466

background image

16. Before lowering the top, open the swing gate to
prevent possible damage to the rear center high-mounted
brake lamp. Move to the front of the vehicle. Grasp the
side bow behind the header and lift the top, folding it
toward the rear of the vehicle.

17. Tuck the fabric and the check straps between the
bows and as far inward as possible. This will keep any

portion of the top from flapping outside of the vehicle.
When the top is completely down, position the drip rails
so they make a “v-shape”, this prevents damage to the
soft top material.

18. Close front header latches.

19. Remove door frames, if desired. Refer to “Door
Frame” in this section.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

151

3

«
...
150
151
152
153
154
...
»

Summary of Contents for 2008 Wrangler



















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 Wrangler

2011 grand cherokee

Brand: Jeep Pages: 22

2013 Grand Cherokee

Brand: Jeep Pages: 704

Brand: Jeep Pages: 558

Brand: Ford Pages: 12

Brand: FORM FIT Pages: 2

BLADE-AL(TB)-TL2

Brand: iDataLink Pages: 9

Brand: Magneti Marelli Pages: 2

Porsche 911 GT3 R

Brand: iRacing Pages: 25

Brand: Dacia Pages: 238

VIEWLINE 52 MM - MOUNTING 11-09

Brand: VDO Pages: 4

Brand: Nav TV Pages: 5

Ram Commercial2016

Brand: Dodge Pages: 675

Brand: Audiovox Pages: 24

Brand: Mercedes-Benz Pages: 2

Brand: Westin Pages: 2

Brand: StowAway 2 Pages: 2

Brand: Saab Pages: 12

Brand: Quadratec Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands