Jeep 2008 Wrangler Page 123 Owner'S Manual Download

Page: 123 / 466

5. Unzip the zipper on the sport bar cover to expose the
pivot brackets. Remove the brackets using a #T30 Torx

威

head driver. Recover and re-zip the sports bar cover.
Store pivot brackets and screws in a safe place.

6. Reinstall the hard top. Refer to “Freedom Top Three-
Piece Modular Hard Top — Front/Rear Panel Installa-
tion” later in this section.

Installing the Soft Top

NOTE:

The following procedures are for first time set

up only. For future soft top procedures, refer to “Soft
Top” in this section.

1. Locate and remove the following items prior to hard
top removal:

•

Right and left door frames

•

Door frame attachment knobs (four for two-door
models, six for four-door models)

•

Right and left quarter windows

•

Rear window

2. Remove the hard top. Refer to “Freedom Top Three-
Piece Modular Hard Top — Front/Rear Panel Removal”
later in this section.

122

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2008 Wrangler



















































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Wrangler

Reviews:

Related manuals for 2008 Wrangler

Brands by name

Popular brands

Jeep 2008 Wrangler, Owner'S Manual

Search results

Summary of Contents for 2008 Wrangler

Reviews:

Related manuals for 2008 Wrangler

Brands by name

Popular brands