Jeep 2008 Wrangler Owner'S Manual Download | Manualshive

Page: 289 / 466

background image

N (Neutral) Position

This range disengages the front and rear driveshafts from
the powertrain. To be used for flat towing behind another
vehicle. Refer to “Recreational Towing” in Section 5 of
this manual.

4L Position

This range locks the front and rear driveshafts together,
forcing the front and rear wheels to rotate at the same
speed. This range (4L) provides additional traction and
maximum pulling power for loose, slippery road surfaces
only. Do not exceed 25 mph (40 km/h).

The 4WD Indicator Light (located in the instrument
cluster) will illuminate when the transfer case is shifted
into the 4L position.

Shifting Procedure

2H to 4H or 4H to 2H

Shifting between 2H and 4H can be made with the
vehicle stopped or in motion. If the vehicle is in motion,
shifts can be made up to 50 mph (80 km/h). With the
vehicle in motion, the transfer case will engage/
disengage faster if you momentarily release the accelera-
tor pedal after completing the shift. Apply a constant
force when shifting the transfer case lever.

288

STARTING AND OPERATING

«
...
287
288
289
290
291
...
»

Summary of Contents for 2008 Wrangler



















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 Wrangler

Brand: GMC Pages: 140

Brand: Porsche Pages: 51

Brand: Whispbar Pages: 14

Gasoline/Electric DS Golf Car 1996

Brand: Club Car Pages: 48

Lippert Components LEVELEGS MPD 66385

Brand: Atwood Pages: 6

65 41 2 152 528

Brand: BMW Pages: 21

Brand: Saab Pages: 3

Electra 225 1965

Brand: Buick Pages: 914

RUDDER ANGLE INDICATOR

Brand: VDO Pages: 8

Brand: Chevrolet Pages: 372

Brand: Simplicity Pages: 10

Brand: v.link Pages: 19

Brand: ROADGEAR Pages: 2

Brand: Blaupunkt Pages: 6

Outlander Plug-in hybrid

Brand: Mitsubishi Pages: 28

Brand: Menabo Pages: 8

Brand: Seat Pages: 372

Brand: iSimple Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands