manualshive.com logo in svg

Jeep 2008 Wrangler, Owner'S Manual, Page: 367 / 466

Share
Download
Jeep 2008 Wrangler Owner'S Manual Download Page 367

JACKING AND TIRE CHANGING

WARNING!

•

Getting under a jacked-up vehicle is dangerous.
The vehicle could slip off the jack and fall on you.
You could be crushed. Never get any part of your
body under a vehicle that is on a jack. If you need
to get under a raised vehicle, take it to a service
center where it can be raised on a lift.

•

The jack is designed to use as a tool for changing
tires only. The jack should not be used to lift the
vehicle for service purposes. The vehicle should
be jacked on a firm level surface only. Avoid ice or
slippery areas.

Jack Location

The jack and lug wrench are located in the rear storage
compartment. Refer to “Storage” in Section 3 of this
manual.

Jack Storage

366

WHAT TO DO IN EMERGENCIES

Summary of Contents for 2008 Wrangler



















































































































































































































































































































































































































































































Reviews:

No comments