Jeep 2008 Wrangler Page 192 Owner'S Manual Download | Manualshive

Page: 192 / 466

background image

25. Close the header latches and return the sun visors to
their secured position.

FOLDING WINDSHIELD

The fold-down windshield and removable side bars on
your vehicle are structural elements that can provide
some protection in some accidents. The windshield also
provides some protection against weather, road debris
and intrusion of small branches and other objects.

Do not drive your vehicle on-road with the windshield
down and the side bars removed as you lose the protec-
tion these structural elements can provide.

If required for certain off-road uses, the side bars can be
removed and the windshield folded down. However, the
protection afforded by these features is then lost. If you
remove the side bars and fold down the windshield,
drive slowly and cautiously. It is recommended that the
speed of the vehicle be limited to 10 mph (16 km/h), with
low range operation preferred, if you are driving off-road
with the windshield folded down.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

191

3

«
...
190
191
192
193
194
...
»

Summary of Contents for 2008 Wrangler



















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 Wrangler

Brand: Lancia Pages: 276

Brand: T-Tech Pages: 38

Brand: Hama Pages: 2

Brand: JETBAG Pages: 44

Brand: Jeep Pages: 12

Brand: Jeep Pages: 6

Brand: Bestop Pages: 11

Brand: Whispbar Pages: 14

2014 Insignia VXR SuperSport

Brand: Vauxhall Pages: 56

Brand: Gator Pages: 2

Dodge Challenger SRT8®Challenger SRT8 392 2012

Brand: Dodge Pages: 5

Brand: Edelbrock Pages: 2

Brand: Mitsubishi Pages: 19

Brand: Mercedes-Benz Pages: 91

Brand: Jaeger Pages: 16

Brand: Cadillac Pages: 19

Brand: Autoplugin Pages: 8

Brand: ACV Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands