Home
/
Jeep
/
2008 Wrangler
/
Owner'S Manual

Jeep 2008 Wrangler, Owner'S Manual, Page: 118 / 466

Share

Page: 118 / 466

Jeep 2008 Wrangler Owner'S Manual Download Page 118

Electrical Outlet Use With Engine Off

WARNING!

•

Many accessories that can be plugged in draw power
from the vehicle’s battery, even when not in use (i.e.,
cellular phones, etc.). Eventually, if plugged in long
enough, the vehicle’s battery will discharge suffi-
ciently to degrade battery life and/or prevent engine
starting.

•

Accessories that draw higher power (i.e., coolers,
vacuum cleaners, lights, etc.), will degrade the battery
even more quickly. Only use these intermittently and
with greater caution.

•

After the use of high-power draw accessories, or long
periods of the vehicle not being started (with acces-
sories still plugged in), the vehicle must be driven a
sufficient length of time to allow the alternator to
recharge the vehicle’s battery.

•

Power outlets are designed for accessory plugs only.
Do not hang any type of accessory or accessory
bracket from the plug.

CUPHOLDERS

Front Cupholders

The front cupholders are located in the center console.

NOTE:

The front cupholder insert is removable for

cleaning.

Front Cupholders

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

117

3

«
...
116
117
118
119
120
...
»

Summary of Contents for 2008 Wrangler



















































































































































































































































































































































































































































































Reviews:

No comments