manualshive.com logo in svg

Jeep 2008 Wrangler, Owner'S Manual, Page: 281 / 466

Share
Download
Jeep 2008 Wrangler Owner'S Manual Download Page 281

Shift Lock Manual Override

Your vehicle may be equipped with a shift lock manual
override. The manual override may be used in the event
that the shift lever should fail to move from PARK with
the key in the ON position and the brake pedal de-
pressed. To operate the shift lock manual override, per-
form the following steps:

1. Firmly set the parking brake.

2. Using a flat blade screwdriver, carefully remove the
shift lock manual override cover which is located on the
PRNDL bezel, above the PARK position.

3. Depress and maintain firm pressure on the brake
pedal.

4. Using the screwdriver, reach into the manual override
opening. Press and hold the shift lock lever down.

5. Depress the shifter release button and shift into NEU-
TRAL.

6. The vehicle may then be started in NEUTRAL.

Have your vehicle inspected by your local authorized
dealer, if the shift lock manual override has been used.

280

STARTING AND OPERATING

Summary of Contents for 2008 Wrangler



















































































































































































































































































































































































































































































Reviews:

No comments