manualshive.com logo in svg

Jeep 2008 Wrangler, Owner'S Manual, Page: 422 / 466

Share
Download
Jeep 2008 Wrangler Owner'S Manual Download Page 422

4. Turn both park and turn signal socket assemblies 1/4
turn counterclockwise and remove.

5. Remove the four screws holding the metal retaining
ring.

6. Remove the lamp from the collar.

7. Grasp the bulb and turn 1/4 turn counterclockwise.

8. Pull the bulb from the housing.

9. Push connector locking tab to the unlock position.

10. Remove connector from bulb.

11. Push connector onto new bulb base, and push the
connector locking tab to the lock position.

CAUTION!

Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with any oily surface, clean the
bulb with rubbing alcohol.

12. Reinstall bulb housing. Rotate the bulb 1/4 turn
clockwise.

Front Park/Turn Signal

1. Remove the front grille. Turn the retainers along the
top 1/4 turn counterclockwise and remove.

2. Pull the bottom of the grille away starting at one side
and working toward the other.

MAINTAINING YOUR VEHICLE

421

7

Summary of Contents for 2008 Wrangler



















































































































































































































































































































































































































































































Reviews:

No comments