3
2
FRONT BRACKET
4
2
REAR BRACKET
5
2
SUPPORT BRACE
6
4
7
4
1/2-13 X 1.75” HEX HEAD BOLT
8
2
1/2-13 X 1.50” HEX HEAD BOLT
9
8
1/2” FLAT WASHER
10
6
1/2” LOCK WASHER
11
2
1/2-13 HEX NUT
12
13
4
M12-1.75 HEX NUT
1,2
2
STEP BAR, PASSENGER (1) AND DRIVER (2)
4
1/2” EXTERNAL TOOTH LOCK WASHER
SPACER TUBE
QTY
CONTENTS -
CONTENIDO
- CONTENU
TOOLS -
HERRAMIENTA
- OUTILS
3/4” SOCKET
3/4” WRENCH
19MM SOCKET
RATCHET
TORQUE WRENCH
APPLICATION: 1982-97 FORD RANGER REGULAR CAB
ITEM
APLICACIÓN: FORD RANGER CON CABINA REGULAR, MOD. 1982-97
APPLICATION: FORD RANGER CABINE REGULIÈRE 1982-97
AUTOMOTIVE PRODUCTS, INC.
STEP BAR ASSEMBLIES
25-0560
25-0565
ENSAMBLES DE ESTRIBOS
MONTAGES DE MARCHE-PIEDS
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
75-0126 REVISION C 9/3/08
STEP 1.
Remove the contents from box and check for damage. Verify all parts are present. Read instructions com-
pletely before beginning.
Attach brackets to step bar using 1/2” fasteners as shown. Leave loose.
Attach step bar to body mounts as shown.
Loosen existing hex nut near rear body mount and slip rear brace behind hex nut. Attach other end of rear
brace to bracket using 1/2” fasteners as shown
Repeat installation for opposite side.
Make sure step bar and brackets are properly aligned with vehicle and tighten all fasteners. Recommended
torque value is 64 Ft. Lbs. for 1/2” fasteners.
STEP 2.
STEP 3.
STEP 4.
STEP 5.
STEP 6.
.
1,2
2
ESTRIBOS, LADO DEL ACOMPAÑANTE
Y EL CONDUCTOR
3
2
SOPORTES DELANTERA
4
2
SOPORTES TRASERA
5
2
PIEZA DE SUJECIÓNDEL SOPORTE
6
4
7
4
PERNOS CON CABEZA HEXAGONAL DE 1/2-13 X 1,75”
8
2
PERNOS CON CABEZA HEXAGONAL DE 1/2-13 X 1,50”
9
8
ARANDELAS PLANAS DE 1/2”
10
6
ARANDELAS DE PRESIÓN DE 1/2”
11
2
12
4
13
4
ARANDELAS DE PRESIÓN DE M12-1,75
(1)
(2)
TUBO SEPARADOR
TUERCAS HEXAGONALES DE 1/2-13
ARANDELAS DE PRESIÓN DE DENTADO EXTERIOR DE 1/2”
1,2
2
MARCHE-PIEDS,
ET
3
2
SUPPORTS AVANT
4
2
SUPPORTS ARRIÈRE
5
2
RENFORTS POUR SUPPORTS
6
4
7
4
9
8
10
6
12
4
PASSAGER (1)
CONDUCTEUR (2)
BOULON À TÊTE HEXAGONALE DE 1/2-13 X 1,75 PO
8
2
BOULON À TÊTE HEXAGONALE DE 1/2-13 X 1,50 PO
RONDELLE PLATE 1/2 PO
RONDELLE À FREIN 1/2 PO
11
2
É
13
4
TUBE D'ESPACEMENT
ÉCROUS HEXAGONAUX 1/2-13
RONDELLE À FREIN A DENTS EXT RIEURES,1/2 PO
ÉCROUS HEXAGONAUX M12-1,75
DADO DE 3/4”
LLAVE DE TUERCAS DE 3/4"
DADO DE 19MM
MANERAL
LLAVE DE TORQUE
DOUILLE 3/4 PO
Cl 3/4 PO
DOUILLE 19MM
CLIQUET
CL DE COUPLE
É
É
WO:
2
1
3
4
5
6
FINISH PROTECTION
Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive wax, (e.g.
Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish and open it to
corrosion.
