Jay-Lor A100 Owner'S Manual Download Page 69 | Manualshive

Page: 69 / 72

background image

AAA-055-00138

Rev. 1/14/15

Jaylor Owner Manual

- 68 -

Mini Mixer Models

37.0

EC DECLARATION OF CONFORMITY FOR APPLICABLE MODELS

Orton, Ontario - Canada, April 2011

EC Declaration of Conformity of the Machinery

EG-Verklaring van Overeenstemming betreffende Machines
EG-Konformitätserklärung bezüglich Maschinen

CE-Déclaration de Conformité concernant Machines

ENG - Declaration of Conformity

We, JAY-LOR Canada INC., 071213 10th Line, East Garafraxa, Ontario L9W 6Z9, Canada,
declare on our exclusive responsibility that the Machine for livestock feed mixing [JayLor
A100SP, A50SP & A50TR Series] conforms to the norms and documentation as defined in the
EC Directives: Machine Directive 2006/42/EC and NEN-EN 703 2004+A1 2009.

NL - Verklaring van Conformiteit

Wij, JAY-LOR Canada INC., 071213 10th Line, East Garafraxa, Ontario L9W 6Z9, Canada,
verklaren dat de Machine voor het mengen van veevoeders [JayLor A100SP, A50SP & A50TR
Serie] in de door ons in het handelsverkeer gebrachte bouwwijze en uitvoering, in
overeenstemming is met de normen en normatieve documenten overeenkomstig de EG-
Richtlijnen: Machinerichtlijn 06/42/EG en NEN-EN 703 2004+A1 2009 en onder onze exclusieve
verantwoordelijkheid valt.

D – Konformitätserklärung

Wir, JAY-LOR Canada INC., 071213 10th Line, East Garafraxa, Ontario L9W 6Z9, Kanada,
erklären dass der Maschine für die Aufbereitung von Viehfuttern [JayLor A100SP, A50SP &
A50TR Baureihe] aufgrund unser Konzipierung und Bauart sowie in der von uns im Verkehr
gebrachten Ausführung den einschlägigen grundlegenden Sicherheitsnormen den folgenden EG-
Richtlinien entspricht: Maschinerichtlinie 06/42/EG und NEN-EN 703 2004+A1 2009.

F – Déclaration de Conformité

Nous, JAY-LOR Canada INC., 071213 10th Line, East Garafraxa, Ontario L9W 6Z9, Canada,
déclarons sous notre responsabilité exclusive que la Machine pour la préparation d'alimentation
de bétail [JayLor A100SP, A50SP & A50TR Séries] se trouve en Conformité avec les normes et
documentation conformément aux dispositions des directives CE: Directive Machines
2006/42/EC et NEN-EN 703 2004+A1 2009.

Jake Tamminga
President
JAY-LOR CANADA INC.
www.jaylor.com

«
...
67
68
69
70
71
...
»

Summary of Contents for A100









































































Reviews:

No comments

Related manuals for A100

FX-ARM CONTROLLER

Brand: Magicfx Pages: 16

Brand: DARAY Pages: 24

Brand: Jafar Pages: 9

KOMPAN SPF28666S

Brand: Bommelland Pages: 23

WJHD100 - DIGITAL DISC RECORDE

Brand: Panasonic Pages: 7

Brand: Yardline Pages: 75

Brand: Kamikaze Pages: 112

Brand: KAM Pages: 2

Brand: Raytheon Pages: 68

Brand: KegLand Pages: 23

Brand: SandenVendo Pages: 19

Brand: Flex-A-Seal Pages: 7

Brand: Topcon Pages: 38

Brand: Kongsberg Pages: 188

Brand: Proactive Pages: 14

Brand: sauter Pages: 5

Brand: Trigano Pages: 13

Brand: Fri-Jado Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands