AAA-055-00138
Rev. 1/14/15
Jaylor Owner Manual
- 10 -
Mini Mixer Models
•
Clear the area of bystanders, especially children, when operating.
•
Make sure you are in compliance with all local regulations regarding transporting equipment on
public roads and highways.
•
Before starting, make sure hydraulic system is not leaking, hydraulic hoses and wiring are in
good condition, and that the platform and engine area are free of debris.
•
Make sure there is plenty of ventilation. The exhaust fumes from the internal combustion
engine may cause asphyxiation.
•
Hitch weight of A50 trailer is approximately 100 lbs (45 kg) plus 10% of payload [200 lbs (91 kg
plus 12% of payload for A100 trailer]. Therefore, use only a towing vehicle with adequate hitch
and brakes to stop the vehicle coupled with the machine and payload.
•
On machines equipped with an internal combustion engine, make sure that muffler area is kept
clean of combustible material and that outlet of muffler is not positioned such that exhaust is
directed towards materials that could combust. Otherwise, fire may result.
•
Review safety instructions with all personnel annually.
•
Do not make bodily contact with hot surfaces on the engine or muffler. Serious injury could
result.
7.6 Driving and Hauling Safety
•
Be especially observant of the operating area and terrain – watch for holes, rocks, overhead
obstructions and other hidden hazards. Always inspect the area prior to operation.
•
Do not operate near the edge of drop-offs or banks.
•
Do not operate on steep slopes as overturn may result.
•
Do not allow riders on the machine.
•
Do not protrude feet outside the platform while traveling.
•
Do not operate at unsafe speeds.
•
Make sure you are in compliance with all local regulations regarding transporting equipment
on public roads (i.e. lights, slow moving vehicle sign, tie-downs, safety chains, etc.).
•
Use only an adequate towing vehicle.
7.7 Maintenance and Repair Safety
•
Read and understand this manual and all safety signs before operating, servicing, maintaining
or adjusting the vertical mixer.
•
When parking the mixer, place on a flat, level surface, put controls in neutral, apply parking
brake if equipped (if not, block wheels), stop engine, remove ignition key, and wait for all
moving parts to stop. Be sure to let engine and hydraulic system cool to a safe temperature
before servicing, adjusting or repairing any of these components. Disconnect the spark plug
lead and ground it to ensure the engine does not start unexpectedly.
•
Only properly trained personnel should maintain and repair this equipment.
•
Use only tools, lifting equipment, and safety stands of sufficient capacity for the job.
•
Make sure all guards are in place and properly secured when maintenance work is completed.
•
Before starting, make sure hydraulic system is not leaking and that hydraulic hoses and wiring
are in good condition and will not abrade on edges.
•
Keep hands, feet, hair, and clothing away from all moving and/or rotating parts.
