AAA-055-00138
Rev. 1/14/15
Jaylor Owner Manual
- 21 -
Mini Mixer Models
forwards.
7. Operator Platform
– The operator should
always be standing on the platform while
operating the mixer.
8. Battery
– Provides power to the electric
engine starter, electronic scale system, and
auxiliary components (if applicable).
9. Auger On/Off Control
– Standard units
use a T-handle to control auger on/off.
When T-handle is pulled outward, auger
will begin rotating. When T-handle is
pushed inward, auger will stop rotating.
When the T-handle is rotated in either
direction, it will lock in position. CE units
are controlled by an electronic rocker
switch with ‘on’ and ‘off’ positions installed
at the same location. For these units,
switch must be in the ‘off’ position and ’
10.
Parking Brake
’ must be applied before
engine is started.
10. Parking Brake
– Equipped on CE units.
11. Hydraulic Oil Reservoir/Cap
– Remove
this cap to add oil. Dipstick indicates
proper oil level range.
21. Horn Button
– Equipped on CE units.
Push button in to sound horn.
22. Foot Safety Switch
– Equipped on CE
units. When auger is rotating, the foot
safety switch must be depressed before
unloading door is opened. If not, auger will
stop rotating. This switch works in
conjunction with ‘
23. Door Safety Switch
’.
23. Door Safety Switch
– Equipped on CE
units. When unloading door is opened, this
switch is activated. At this time, ‘
22. Foot
Safety Switch
’ must be depressed or the
auger will stop rotating.
24. Engine Cover
–
Cover should be left in the
‘down’ position and secured during normal
operation to minimize the amount of feed
that could potentially land around the
cooling intake or on the exhaust. Cover can
be pivoted into the ‘up’ position and
secured for maintenance purposes.
25. Mixing Drum Mirror
– Equipped on CE
units. Gives the operator a wide-angle view
of the inside of the mixing drum while
standing safely on
‘7. Operator Platform’
.
