AAA-055-00138
Rev. 1/14/15
Jaylor Owner Manual
- 11 -
Mini Mixer Models
•
Clear the area of bystanders, especially children, when carrying out any maintenance and
repairs or making any adjustments.
•
Do not allow grease or oil to build up on the machine.
•
Always use glove and eye protection when handling the battery.
7.8 Hydraulic Safety
•
Make sure that all components in the hydraulic system are kept in good condition and are
clean.
•
Replace any worn, cut, abraded or flattened hoses or metal lines immediately.
•
Do not attempt any makeshift repairs to the hydraulic fittings or hoses. The hydraulic system
operates under extremely high pressure. Such repairs will fail suddenly and create a
hazardous and unsafe condition.
•
Wear proper hand and eye protection when searching for a high-pressure hydraulic leak. Use
a piece of wood or cardboard as a backstop instead of hands to isolate and identify a leak.
•
If injured by a concentrated high-pressure stream of hydraulic fluid, seek medical attention
immediately. Serious infection or toxic reaction can develop from hydraulic fluid piercing the
skin surface.
•
Before applying pressure to the system, make sure all components are tight and that lines,
hoses, and couplings are not damaged.
7.9 Electrical Safety
•
Before performing any electrical maintenance or service on the internal combustion engine,
consult the engine manufacturer’s manual and understand and follow all safety practices given.
•
Always wear eye protection, gloves and remove all metallic jewelry before performing
maintenance, service or adjustments of the electrical system.
•
Always remove the battery cable leads before performing any maintenance, service or
adjustments of the electrical system.
7.10 Tire Safety
•
Failure to follow proper procedures when mounting a tire on a wheel or rim can produce an
explosion, which may result in serious injury or death.
•
Overloading the tires may result in serious injury or death.
•
Have a qualified tire dealer or repair service perform required tire maintenance.
7.11 Storage Safety
•
Store unit in an area away from human activity.
•
Do not permit children to play on or around the stored machine.
•
Store the unit in a dry, level area and block wheels.
•
Remove ignition key.
7.12 Safety Signs
•
Keep safety signs clean and legible at all times.
•
Replace safety signs that are missing or have become illegible.
•
Safety signs are available from your dealer, distributor, or the factory.
