AAA-055-00138
Rev. 1/14/15
Jaylor Owner Manual
- 31 -
Mini Mixer Models
11.0
OPERATION
The Jaylor mixer is specifically designed to cut and mix feed ingredients into a total mixed ration
(TMR). Many of the features incorporated into this machine are the result of suggestions made
by customers like you. We greatly appreciate any input you may have, and would like to thank
you in advance for any you may give.
Read this manual carefully to learn how to operate the machine safely and how to adjust it to
provide maximum efficiency. Following the operating instructions with a proper maintenance
program will extend the life of your machinery.
12.0
PRE-OPERATION CHECKLIST
Efficient and safe operation of the Jaylor mixer requires that each operator reads and
understands all the operating procedures and all related safety precautions outlined in this
section. A pre-operation checklist is provided for the operator. It is important for both personal
safety and maintaining the good mechanical condition of the machine that this checklist is
followed.
Before operating the machine
the following areas should be checked:
Lubricate the machine as outlined in section ‘
’.
Check fluid levels: hydraulic oil reservoir, engine oil, fuel.
*
Check for oil leaks.
*
Check tire pressure.
Check that wheel nuts are tight.
*
Check that there is no material entangled on the auger (twine and the like).
Check that all guards and safety devices are in place and working properly.
Check that the machine is clean and free of debris.
Check that the steering chain is tight (A50 and A100 self-propelled models). If chain is loose,
see
section ‘
33.0 Steering Chain Maintenance
’.
Check that the trailer coupler connects securely to the towing vehicle ball (A50 and A100
trailer models). If the connection is either too tight or too loose, see section ‘
34.0 Trailer
Coupler Maintenance
’.
Check that the quick attach latches and pins on the skid steer loader have fully engaged with
the quick attach mounting plate (A50 skid steer model only).
After attaching hydraulic hoses to auxiliary ports on the skid steer loader visually inspect for
any hydraulic fluid leaks (A50 skid steer model only).
*
Does not apply to the A50 skid steer model
