Javad JNSGyro-4T, Operator'S Manual

Page: 86 / 116

6-2 JNSGyro-4T Operator’s Manual www.javad.com
TR O U B L E S H O O T I N G
Things to Check First
6
Things to Check First
Before contacting JNS Customer Support about any problems with the
JNSGyro-4T system, refer to the following list of basic suggestions that may
help:
• Go through all external receiver connections carefully and make sure they are
not wrong or loose.
• Double-check the cables. Cables became defective more often than the
devices do.
• Check the sections below for available solutions.
• Reset the unit’s boards using PCView ( Tools->Reset receiver ).
• Restore factory default settings of the boards using PCView (click
Configuration->Receiver , then Set all parameters to defaults ).
• Clear the NVRAM (see “Clearing the NVRAM” on page 4-16).
• Initialize the file system (click Tools->Initialize file system ; this will erase
all files inside the receiver).
WARNING: Do not attempt to repair equipment yourself. Doing so
will void your warranty and may damage the
hardware.