Javad JNSGyro-4T, Operator'S Manual

Page: 46 / 116

2-16 JNSGyro-4T Operator’s Manual www.javad.com
C O N F I G U R A T I O N
MinPad Configuration
2
Table 2-1 gives the different scenarios available and the results after power is
restored to the board. “Specified file” refers to the file name entered in the
Always append to file parameter.
Also, if Always is enabled, your board will automatically start logging data
(to a newly created or an existing file) in the following three cases:
• After pressing the Power key to turn on the unit.
• After resetting the unit (with PCView or the Reset key).
Table 2-1. Data Recording Parameter Behavior
Before
Power
Failure
Enabled Radio Button Results
Off On Always
1
Board data
logged to file
specified.
Data logging will not
resume when power
is restored.
Board will resume
data logging to the
same file when
power is restored. Board will resume
data logging to the
same file when
power is restored.
2
Board data
logged to
default file.
Data logging will not
resume when power
is restored.
A new log file will
open when power is
restored and data will
log to this file. A new log file will
open when power is
restored and data will
log to this file.
3
File
specified;
board data
logging not
started.
No file will open
with this name.
Data logging will not
start when power is
restored. No file will open
with this name.
Data logging will not
start when power is
restored. A log file with this
name will open and
data logging will
start after power is
restored.
4
No file
specified;
board data
logging off.
Data logging will not
start when power is
restored. Data logging will not
start when power is
restored.
A log file with a
default name will
open and data
logging will start
after power is
restored.