Javad JNSGyro-4T, Operator'S Manual

Page: 63 / 116

www.javad.com JNSGyro-4T Operator’s Manual 4-5
O P E R A T I O N
Using MinPad
When data recording is ON, and the FN key is...
Not pressed
Red
No free memory; hardware problem with data
recording.
If FN key mode is «LED blink mode switch»
Green
Data recording started (post-processing
occupation mode undefined).
If FN key mode is «Occupation mode switch»
Green
Data recording started (Kinematic post-
processing occupation mode).
Orange
Data recording started (Static post-processing
occupation mode).
Pressed for < 1 second
If FN key mode is «LED blink mode switch»
Orange Release to change information mode.
If FN key mode is «Occupation mode switch»
Orange
Release to toggle between Static and Kinematic
post-processing modes.
Pressed for 1–5 No light Release to stop data recording.
Pressed for 5–8 seconds Red
Release to turn serial port A baud rate to 9600
bps.
Pressed for > 8 seconds No light No function (data recording still on).
Table 4-1. FN Key Functions and REC LED Status (Continued)
FN Key REC LED Status