Javad JNSGyro-4T, Operator'S Manual

Page: 80 / 116

4-22 JNSGyro-4T Operator’s Manual www.javad.com
O P E R A T I O N
Loading New Firmware
4
8.
Select the Program tab and set the Capture Method to Soft Break
Capture (recommended) (Figure 4-16).
Figure 4-16. Program Tab Settings
9.
Browse for and select the receiver board's RAM file and Flash file
(Figure 4-16).
10.
Click Load and wait until 100% of the files load into your board.
Notice: If you selected an incorrect RAM or Flash file, an error
message displays at the bottom of the dialog box.
Reselect the correct file.
11.
Click File->Exit .
12.
Clear the board’s NVRAM (see “Clearing the NVRAM” on page 4-16) and
update the almanac after loading new firmware.
13.
Repeat all these steps with every JNSGyro-4T boards.