Jason International, Inc. •
501.771.4477
Page 14 of 18
Customer Service : 800.255.5766
Copyright © 2014 Jason International.
NOTE:To ensure the full effects of the MicroSilk
®
system,
the AirMasseur
®
and MicroSilk
®
systems can NOT be
operated at the same time.
OPERATING INSTRUCTIONS
MicroSilk On/Off Icon
To control the operation of the MicroSilk
®
unit, press
and release for each setting: ON or OFF. A 20-minute
decreasing timer will be initiated when the pump motor starts.
Press and hold the MicroSilk
®
icon to cycle through each pump
setting. The MicroSilk
®
icon lights when the water is at operat-
ing level and the LCD displays “System Ready”. The LCD will
display “MS On”, or “MS Off” when the key is pressed. It also
toggles between Temperature and Timer at 5 second intervals.
“Low Water” is displayed for 5 seconds if no water is detected.
AirMasseur
®
On/Off and Modes Icon
To control the operation of the blower, simply press and re-
lease to change the setting to Constant, Wave, Pulse or Off.
A 20-minute decreasing timer will be initiated when the blower
motor starts. Press and hold the Blower icon to cycle though
blower modes. The Blower icon should remain lit as long as
the bath is connected to a power supply. The LCD will display
“Const Air” and blower speed, “Wave Air” and blower speed,
or “Pulse Air” and blower speed, while the key is pressed. The
time remaining on the purge cycle is displayed after the bath
has drained. “Purge Stop” is displayed while the key is pressed
during the purge cycle. This action will terminate the purge cycle.
The mode settings will be remembered on the next startup.
Blower Speeds Icon
Hold the key in Constant mode to go from High to Low then
release and hold again to go from Low to High. Hold the key in
Wave and Pulse mode to go from High to Medium and Medium to
High. The system remembers the last speed setting on the next
startup. The Blower Speeds icon will light up when the blower
is running. The LED displays the blower speed from “10” (Low)
or “55”(Med) to “99” (High) while the key is pressed. You can
reduce the auto purge idle time from 20 minutes to 10 minutes,
by pressing and holding the key for more than 5-seconds during
the purge idle period.
LED Light Icon
Hold the key for less than two (2) seconds to turn the lights Off
or On. Hold the key for more than two (2) seconds to change
modes. The Light icon should remain lit as long as the bath
is connected to a power supply. This function has a two-hour
timer and remembers the last mode. The LCD displays “Light
On” or “Light Off while the key is pressed for less than two (2)
seconds, “Light Cycle” is displayed if pressed for more than
two (2) seconds.
Customized Settings
The 12-character LCD display can be customized by pressing
the AirMasseur
®
and Blower Speeds icon simultaneously for
five (5) seconds, while the system is off.
Note:
The Blower
Speeds icon will not be illuminated during this process. Use
the above figure to locate the icons and LCD display. A menu
will be displayed to choose the following: Purge 24, (starts the
blower every 24 hours for two (2) minutes at the time the purge
was set), Product Test Diagnostics, Temperature (
F or
C) and
Language (English or Spanish).
Menu Instructions
Use the top AirMasseur
®
icon to scroll through the different menu
items. Use the Blower Speeds icon to change an option. For
example, press and release the AirMasseur
®
icon to change
from Product Test to the Temperature option. Press and release
the Blower Speeds icon to change the temperature display from
F (Fahrenheit) to
C (Celsius).
Product Test Diagnostics
After selecting the Product Test option from the menu, the unit
will perform a series of tests to confirm correct installation of
components. The test will begin by displaying the configuration
number, followed by the software revision number. Next,
the auxiliary control box will be tested to ensure proper IR
communication. The display will then test the Temperature and
Low Water level sensor (ITW-209). Next, each of the six (6) icon
buttons will begin to light. Press the illuminated button to proceed
to the next icon. After the icon test, the blower will start for two
(2) seconds on the High setting. Lastly, the LED Light unit will
be tested. If you receive an error on any of the tests, confirm
proper installation of component to the correct control box. (See
the
CONTROL BOX CONNECTIONS
section).
Remote Control
The Signature Edition control system includes a waterproof
floating Universal Remote Control. It controls all bath functions
plus a TV, DVD, CD, etc. which can be heard through the Sound
Immersion Transducers (optional).
SIGNATURE EDITION MICROSILK
®
-AIRMASSEUR TOUCHPAD
Figure 13
OPERATING INSTRUCTIONS, FEATURES, AND CONTROLS (cont.)