Jason International, Inc. •
501.771.4477
Page 13 of 18
Customer Service : 800.255.5766
Copyright © 2014 Jason International.
STANDARD AND PREMIER EDITION MICROSILK
®
-AIRMASSEUR
®
TOUCHPAD
NOTE:To ensure the full effects of the MicroSilk
®
system,
the AirMasseur
®
and MicroSilk
®
systems can not be
operated at the same time.
OPERATING INSTRUCTIONS
MicroSilk
®
On/Off Icon
The MicroSilk
®
icon is used to activate the MicroSilk
®
unit
and the 20-minute timer.
•
Pressing the icon the first time starts
the MicroSilk
®
unit.
•
Pressing the icon again will shut
the MicroSilk
®
unit off.
•
If the AirMasseur
®
blower is on, pressing this icon
will turn off the blower and turn on the MicroSilk
®
unit.
AirMasseur
®
On/Off and Mode Icon
The AirMasseur
®
icon is used to activate the blower and
the 20-minute timer.
•
Pressing the icon the first time starts the blower in
the constant high speed mode.
•
Pressing the icon again begins the wave mode,
indicated by a slow flashing light.
•
Pressing the icon a third time will change the
blower to pulse mode. This is indicated by a rapid
light flash.
•
If the MicroSilk
®
unit is on, pressing this icon will
turn off the MicroSilk
®
unit and turn on the Air-
Masseur
®
blower.
Blower Speeds Icon
The Blower Speeds icon is used to increase or decrease
the blower speed once the blower is On.
•
Press and hold the icon to decrease the blower
speed until the desired intensity is reached, then
release.
•
Press and hold the icon again to increase the
blower speed until the desired intensity is reached.
The blower will return to its highest speed on any mode
change.
LED Light Icon
The LED Light icon is used to operate an LED light
(if installed)
•
Press the icon for less than two (2) seconds to
turn the lights Off or On.
•
Hold the icon for more than two (2) seconds to
change modes.
This function has a two (2) hour timer and remembers the
last mode.
Figure 12
OPERATING INSTRUCTIONS, FEATURES, AND CONTROLS (cont.)