Jason International, Inc. •
501.771.4477
Page 8 of 18
Customer Service : 800.255.5766
Copyright © 2014 Jason International.
STANDARD EDITION MICROSILK
®
-AIRMASSEUR
®
Jason’s Standard Edition MicroSilk
®
-AirMasseur
®
system
features the best in luxury bathing for the leisure bath industry.
To assure that your bath functions properly, the MicroSilk
®
and blower control boxes must beproperly connected
NOTE: For 120V systems, the power cords for the
MicroSilk
®
control box and the blower control box must
be plugged into a 120V, 20 amp GFCI dedicated circuit.
MICROSILK
®
-AIRMASSEUR
®
CONTROL BOX CONNECTIONS
Figure 9
TRANSDUCER
BLACK
RED
+
-
BLACK
-
+
RED
BLUETOOTH
AMPLIFIER
Optional Bluetooth Sound Immersion
Transducers installed on bath. Bluetooth amp supplied
and field installed.
120X / 60J
D
15C
Vq Fgflecvgf
IHEK Stqvgevgf Ugtxleg
Ocng Pgoc
]HOT Snwi
KOE-213
KUF-238
Ocng Pgoc
Nlpg Eqppgevlqp
120X / 60J
D
20C
Vq Fgflecvgf
IHEK Stqvgevgf Ugtxleg
Hgocng Pgoc
Nqcf Eqppgevlqp
Mg
C
rcf
aKFW-288b
Dnqygt
OU Swor
Ocng Pgoc
Nlpg Eqppgevlqp
Mg
C
rcf Ecdng
aEDN-169b
Transducer
Cables
Transducer
Cables
PqvguB
C Ulping Fgflecvgf 120X/60J
D
20C IHEK Stqvgevgf Ugtxleg lu
tgswltgf hqt cnn dcvk gswlrogpv.
Cfflvlqpcn qrvlqpu oc
C
tgswltg ownvlrng qwvngvu lpuvcnngf qp vkg
ulping ugtxleg.
INSTALLATION INSTRUCTIONS (cont.)
The MicroSilk
®
-AirMasseur
®
Control Box
The MicroSilk
®
unit, blower, and keypad must be plugged into
the proper receptacles for correct operation of the MicroSilk
®
-
AirMasseur
®
system. See
Figure 9
for connections:
(A) The power cords for the MicroSilk
®
-AirMasseur
®
control
box must be connected into the proper GFCI dedicated circuit
for the system (see note).
(B) The MicroSilk
®
pump’s power cord will need to be plugged
into the control box Refer to the
ELECTRICAL
section of
this manual for connecting the pump to the control box.
(C) Eight-pin mini-DIN terminal for the MicroSilk
®
Keypad.
(D) The blower’s power cord will need to be plugged into
the control box. Refer to the
ELECTRICAL
section of this
manual for connecting the blower to the control box.
