Jason International, Inc. •
501.771.4477
Page 12 of 18
Customer Service : 800.255.5766
Copyright © 2011 Jason International.
siGnAtuRE EDitiOn WHiRLpOOL pARts List
(Ls640)
Main/Secondary Pump Pump Control Box
Keypad
Keypad Cable
Control Box Stand
LED Light Assembly
Ozone Sanitation Unit LED Light Cable
Heater
Water Level/Temp Sensor
signAture eDition whirlpool
Jason’s Signature Edition Whirlpool system is the most
advanced bath manufactured by Jason International, Inc.
and features the ultimate in luxury bathing for the leisure bath
industry. The pump control box must be properly connected
for the bath to function correctly.
tHE pump cOntROL BOX
The Pumps, Ozone, Keypad, LED Light, and Water Level
Sensor must be plugged into the proper receptacles for cor-
rect operation of the Whirlpool system. See
Figure 7A
for
connections: (A) The junction box for the pump control boxes
and heater must be connected into a 240v, 20 amp, GFCI
dedicated circuit. (B) Pre-wired power cords to pumps (C)
and Ozone unit (G).Eight-pin mini-DIN terminal for installa-
tion of the Whirlpool keypad (F). Six-pin mini-DIN terminals
for the water/temperature sensor (D) and LED Light (E) to
the pump control box.
Note:
This diagram
(Figure 7A)
also applies to 50 Hz,
240v pumps, controls, and power supply systems.
instALLAtiOn instRuctiOns (cont.)
Figure 7A
