Jason International, Inc. •
501.771.4477
Page 5 of 18
Customer Service : 800.255.5766
Copyright © 2011 Jason International.
instALLAtiOn instRuctiOns (cont.)
Mortar is required when the subfloor is not smooth and
7.
level; when additional sound insulation is desired; or when
the bath is installed in a drop-in application. In alcove
installations, a bed of mortar may also be recommended
to aid in leveling the bath.
NOTe: Do not use a sand bed
to install or level the bath.
Secure the bottom of all equipment mounts so that it
8.
is level with the bottom of the bath.
Position the bath
in the area of intended installation and cut the equipment
support strap(s) to allow the equipment to rest firmly on the
floor. We recommend securing the equipment mounts to
the floor with removable fasteners for ease of servicing.
protect the acrylic bath surface from damage during
9.
installation with a suitable material, i.e., cardboard
and/or plastic film.
The acrylic surface of this bath has
been provided with a protective film which helps protect the
bath during shipment and installation. Additional protection
may also be required to protect the acrylic surface during
installation. If the bath is tiled in, remove the necessary
portion of the film when installing the tile.
