Jasic EVO 2.0 HRC-01, Operator'S Manual

Page: 9 / 20

9
SAFETY INSTRUCTION
Materials and their disposal
Welding equipment is manufactured with BSI published standards meeting CE requirements for
materials which do not contain any toxic or poisonous materials dangerous to the operator.
Do not dispose of the equipment with normal waste.
The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment states that
electrical equipment that has reached its end of life must be collected separately and returned
to an environmentally compatible recycling facility for disposal.
For more detailed information please refer to the HSE website www.hse.gov.uk
PACKAGE CONTENTS AND UNPACKING
Supplied within your new Jasic EVO product package will be the following items with each model.
Use care when unpacking the contents and ensure all items are present and not damaged.
If damage is noted or items are missing, please contact the supplier in the first instance and before
installing or using the product.
Record the product model, serial numbers (if applicable) and purchase date in the information section
found on the inside front page of this operating manual.
Jasic EVO HRC - 01 (9 pin Wired Hand Remote Control)
Jasic EVO HRC - 02 (Wireless Hand Remote Control)
c/w Remote Control Receiver Module
Jasic EVO HRC - 04 (3 pin Wired Hand Remote Control)
Please Note: Package contents may very depending on country location and package part number purchased
Please Note:
For further information regarding the operation/setup of remote control, please consult your EVO
machine operating manual.