background image

2

 

Your new product

 

 

Thank you for selecting this Jasic EVO 20 product.

 

 

This product manual has been designed to ensure that you get the most from your new product.           
Please ensure that you are fully conversant with the information provided paying particular attention         
to the safety precautions. The information will help protect yourself and others against the potential 
hazards that you may come across.

 

 

Please ensure that you carry out daily and periodic maintenance checks to ensure years of reliable and 
trouble free operation.

 

 

Please call your Jasic distributor in the unlikely event of a problem occurring. 

 

Please record below the details from your product as these will be required for warranty purposes and  
to ensure you get the correct information should you require assistance or spare parts.

 

 

 

Date purchased ________________________________________

 

 
 

From where       ________________________________________

 

 
 

Serial number   ________________________________________

 

 

(The serial number is normally located on the top or underside of the machine and will begin with AA)

 

 

For further information on your Jasic product warranty registration please visit:

 

www.jasic

-

warranty.co.uk

 

 
 
 
 

 
 

 

Disclaimer

 

Whilst every effort has been made to ensure that the information contained within this manual is 
complete and accurate, no liability can be accepted for any errors or omissions. 

 

 

 
 
 

Please Note: 

 

Products are subject to continual development and may be subject to change without notice.

 

Regularly check our product pages at www.jasic.co.uk for revision updated operating manuals.

 

 

No part of this manual may be copied or reproduced by any means without the written permission         
of Wilkinson Star Limited. 

 

Summary of Contents for EVO 2.0 HRC-01





















Reviews: