Japan Radio Co. JLR-7600, Instruction Manual

Page: 77 / 184

4-35
4. Press the key again at the final waypoint to decide the temporary route
5. Press the key to set "RADIUS", "WIDTH" and "GC/RL", and press the key.
Please refer to "4.5.2 Creating Route" for details.
6. Press the key to select "START", and press the key.
The following popup is displayed. If you wish to registar the route in the route list, select "YES".
The set route is registered in the smaller number of empty route number, and navigation is performed.
If you don't wish to register the roure in the route list, select "NO". However, the set route is registered
in the route number 21 as the temporary route
The temporary route (route number 21) can't be editted.
The waypoints selected with the cursor will also be registered in the waypoint list.
(5) Select from the waypoint list
A waypoint can be selected from the waypoint list.
1. Press the key.
2. Press the key to select "LIST" and "WPT LIST", and press the key.
3. Press the key to set the waypoint number you wish to set as the waypoint.
4. Press the key to set "RADIUS", "WIDTH" and "GC/RL", and press the key.
Please refer to "4.5.2 Creating Route" for details.
5. Press the key to select "START", and press the key.
Navigation will be started.
(6) Select a route from the route list
The GOTO key can be used to select and execute a route.
1. Press
the key.
2. Press the key to select "LIST" ans "ROUTE LIST", and press the key.
3. Press the key to select route, and press the key.
4. Press the key to set "LEG CHANGE", "DIRECTION" and "SPEED SMOOTHING", and
press the key.
Please refer to "4.6 Performing Navigation" for details.
5. Press the key to select "ROUTE" and "START", and press the key.
Navigation will be started.
SAVE ROUTE LIST
？
YES NO