Japan Radio Co. JLR-7600, Instruction Manual, Page: 136 / 184

6-8
6.3
Display Unit Installation
6.3.1 Selecting the Position for Installation
Install this display at least 1 m away from any magnetic compasses. Installation near
a magnetic compass may interfere with the magnetic compass, resulting in an
accident.
Do not use this display at the voltage other than its rated voltage. Doing so results in
fire, electric shock or failure.
Use the indicated screws when installing the display unit to a stable wooden
surface. Failure to do so may result in the display unit falling over, causing injury or
property damage.
During installation, be sure to connect the earth plate and earth cable to the earth
terminal. Failure to do so may cause electric shock in case of failure and electric leak.
Do not use or leave the equipment at places where it is exposed to direct sunlight or
to hot air for an extensive period of time or the temperature becomes 55

C or higher.
Doing so sometimes causes fire or failure.
Do not put the equipment on an unstable place such as wobbly base or tilted area.
Doing so may cause the equipment to drop or fall, resulting in injury and failure.
Do not put the equipment in the cabinet or cover it with the cardboard. Doing so may
cause the equipment to be filled with heat, resulting in fire and failure.
Use the proper power cable, signal cable, and earth cable. Failure to do so may
cause this unit to damage other equipment and vice versa.
WARNING
CAUTION