Japan Radio Co. JLR-7600, Instruction Manual

Page: 122 / 184

4-80
4.15.17.3 How to Use Exclusive PC Tool
The usage of "JrcRouteTrans.exe" which is a tool for exclusive use of the input and output of the "route,
waypoint and track" are described.
(1) Preparation
Installation is unnecessary. Copy "JrcRouteTrans.exe" to arbitrary folders.
(2) When outputting from a display
1. Select "Display=>PC" from "TX/RX".
2. Specify the file name to save.
1) Put a check into "Specify the file name".
2) Specify a folder by "file" and input a file name.
When not specifying,
¥JRC_ROUTE folder is generated and it is saved at "JRC_Date_Time_waypoint.(or route, track)
csv."
Refer to "(4) CSV file" about a CSV file.
3. Press “Start”.
It is displayed with "Wait to RX ROUTE" that it is displayed as "START."
(Also in the waypoint and track, it is displayed as "Wait to RX ROUTE".)
4. When data is received from a display, "RX ROUTE" will blink.
5. When reception is completed, it will be displayed as "Wait to RX ROUTE".
6. Press "Stop".
7. Press "finish" and terminate a tool.
(3) Input into a display.
Data transmission /
reception selection
Port setting
File name specification
Display area
"START"
"Wait to RX ROUTE"
"RX ROUTE"
Data TX/RX start/stop
button
Finish button of a tool
File name
selection
button
Transmitting file list
Display area
"START"
"TX ROUTE"
"transfer Complete"