Japan Radio Co. JLR-7600, Instruction Manual

Page: 51 / 184

4-9
4.2.1.1 Startup (Standard)
If all the self-check results are ‘OK’, the screen is automatically changed to the normal screen.
4.2.1.2 Startup (Error-1)
If the self-diagnosis results are errors “NG,” the results are displayed as follows.
When any abnormality (NG) is found, contact JRC or one of our agents.
4.2.1.3 Startup (Error-2)
Messages shown below may be displayed during sensor diagnostics.
The message appears when display unit and sensor configuration settings do not match, such as
when equipment has been replaced.
When this occurs, select one of the items, and press the key to perform it.
[ SENSOR]: Replaces display configuration with the sensor configuration.
[ DISPLAY]: Replaces the sensor configuration with the display configuration.
Consult with JRC or its affiliate if this is displayed frequently.
4.2.1.4 Startup (Error-3)
When the program is corrupted, the following screen is displayed. Turn off the power and contact JRC
or one of our agents.
R0004
Recovery
mode.
DISPLAY COFIG IS
DIFFERENT FROM
SENSOR
SENSOR DISPLAY
Supplement
Supplement