Janson Controls FC100 Series, Manual, Page: 63 / 108

63
0 : Invalid
Set as empty terminal , no function 1
：
Jog
Set as JOG ( inching ), usually used in trial running , common inching is operated
by 5Hz ,
2 : Jog Forward Set as JOG forward .
3 : Jog reverse Set as JOG reverse .
4 : Forward / reverse
Set as forward / reverse switching , when the terminal is defined to be valid ，
running status reverse .
Parameter : P102 = 1 , P315 = 6 , P316 =
7
Terminal status
Running condition
FWD REV
ON OFF Forward
ON ON Reverse
OFF OFF Stop
5 : Running ( Set terminal as running signal .)
6 : Forward ( When terminal is valid , motor run forward .)
7 : Reverse ( When terminal is valid , motor run reverse .)
8 : Stop ( When terminal is valid , motor run reverse .)
9 : Multi - speed 1
10 : Multi - speed 2
11 : Multi - speed 3
12 : Multi - speed 4 ( 15 - speed can be selected by terminal multi - speed 1 , 2 , 3 and
4 as below table :)
6
Chapter 6 Description of parameter setting
FC100 Series User Manaul