Janson Controls FC100 Series, Manual, Page: 22 / 108

22
4
CHAPTER 4 DIGITAL KEYPAD OPERATION
4 . 1 Description of Digital Keypad
This digital keypad includes two parts : Display panel and keypad . Display panel
provides the parameter display and shows operation status of the AC drive . Keypad
provides programming interface between users and AC drives .
UP / DOWN
Function
Display key
Data
Confirmation key
RUN / STOP
Frequency
setting knob
LED display
U / T1 V / T2 W / T3
R / L1 S / L2 T / L3
RS - 485
ENTER / DISP
Shift / Enter / Switch Display Button
shift to another digit or switch to another display by short - pressing , confirm
a setting by long - pressing
PRG / RESET
Program key / fault reset button
short press for programming key , press 2 seconds for the result button
Run / Stop
Press to Start or Stop the AC drive operation . This key can only be used to Sto p
the AC Drive when the drive is controlled by the External Control Terminals .
ENTER
DISP
ENTER
DISP
ENTER
DISP
ENTER
DISP
ENTER
DISP
ENTER
DISP
ENTER
DISP
ENTER
DISP
ENTER
DISP
ENTER
DISP
FC
Chapter 4 Digital Keypad Operation
FC100 Series User Manaul