Jansen 499.007, Operating Instructions Manual

Page: 19 / 48

Edition 06/2015 Page 19
4.3.5 Adjustment to required dimension
All three adjustment spindles on the welding bench are equipped with absolute digital
dimension indicators. The indicators are adjusted on the outside stops.
When adjusting the dimensions with the hand
crank, always nullify the spindle play, i.e. always
adjust to the required dimension from the inside to
the outside! The spindle play is thereby nullified.
To ensure during work that the dimension indicators are protected against weld spat-
ter, soiling and the danger of crushing, the mechanical protective covers are folded
down.
Remove the crank after adjusting the dimension

Risk of shifting on impact.
Protective cover
(folding)
Digital display
with absolute dimension
indicator
Hand crank
Dimension indicator
The indicated dimension may differ by +/- 1 mm from the effective
dimension due to the production tolerances of the spindle!
(dimension indication is not used to control the saw cut)