Jansen 499.007, Operating Instructions Manual

Page: 12 / 48

Page 12 Edition 06/2015
3.5 Permitted modes of transport
Within the premises, the welding bench can be transported or moved in one of two
ways:
With a forklift (bearing load 2 tons)
Risk of cable jamming!
With a crane (bearing load 2 tons)
Never transport the welding bench in any other way than those de-
scribed above. Unscrew the ring screws after transport. Be careful
when located under suspended loads.
When transporting with a lorry or suchlike, the welding bench must
be secured on the load floor.
The cross slides must be closed for
transport.
Longitudinal slides must be
parallel to the foundation.
Forklift
2 tons bearing load
Close the cross rails so that
they are not able to touch the
belts (risk of damage!)
Four-strand hook rope
2 tons bearing load
or
4 harnesses
Bearing load per harness
500 kg