Jansen 499.007, Operating Instructions Manual

Page: 10 / 48

Page 10 Edition 06/2015
3.2 Adjust the height of the bench
The height of the bench can be adjusted to the required working height of 980
–
1050 mm at the corners of the baseplate using a square spanner.
3.3 Starting up
3.3.1 S witching on
(For details of controls, see Chapter 4.3)
1. Connect the ground cable of the welding unit with the ground plate on the
welding bench.
2. Plug the mains connection plug into the 400 V socket
Connection plate
for ground cable
Square spanner
The socket must be fitted with a fuse!