www.toews.com
20
w
q
e
Bobbin Winding
• Removing the bobbin
q
Hook cover plate release button
w
Hook cover plate
Gently slide the hook cover plate release button
q
to the
right and remove the cover plate
w
.
Lift out the bobbin.
q
w
• Horizontal spool pin
q
Spool pin
w
Large spool holder
e
Small spool holder
Lift up the spool pin
q
. Place a spool of thread on the
spool pin with the thread coming off the spool as shown.
Attach the large spool holder
w
, and press it firmly
against the spool of thread.
The small spool holder
e
is used with narrow or small
spools of thread.
q
w
q
e
q
w
e
Removing and Attaching the Foot Holder
CAUTION:
Turn off the power switch when changing the presser
foot.
q
Thumb screw
w
Foot holder
e
Presser bar
•
To remove
Remove the thumb screw
q
by turning it
counterclockwise with a screwdriver.
•
To attach
Match the hole in the foot holder
w
with the threaded
hole in the presser bar
e
. Fit the thumb screw
q
into
the hole. Tighten the screw
q
by turning it clockwise
with a screwdriver.
CAUTION:
Turn off the power switch when removing or attaching
the foot holder.
Changing Presser Foot
q
Snap-on button (red button)
w
Groove
e
Pin
•
To remove
Raise the needle to its highest position by turning the
handwheel counterclockwise. Raise the presser foot,
and press the red button
q
on the back of the foot
holder.
•
To attach
Place the selected presser foot so that the pin
e
on
the foot lies just under the groove
w
on the foot
holder. Lower the presser bar to lock the foot into
place.
Janome DC4030 Instruction manual
Janome Sewing Machine
www.toews.com
DC4030 Owners Manual/ User Guide
