Page 33
Program parameters
Press both keys simultaneously for about 1 sec-
ond.
If a user password was programmed, the pass-
word request appears with "000".
The first number of the user password flashes
and can be changed with key 2. Pressing key 1,
the next number is selected and flashes.
If the right combination was entered or no user
password was programmed, you reach pro-
gramming mode.
In programming mode the menue for the current
transformer appears first.
With key 2, move to programming menue for
voltage transformer and parameter list.
The parameters for current and voltage trans-
former can only be read at UMG96S.
PRG
k A
L1
L2
L3
CT
PRG
V
L1
L2
L3
VT
L-L
Change a parameter at parameter list.
Confirm selection with key 1.
The last selected address and the correspond-
ing value is indicated.
The first number of the address is flashing.
Select address.
Select address with key 1 and change with key
2.
Change value.
The desired address is set.
Select a number of the value with key 1 and
change with key 2.
Leave programming
Press both keys simultaneously for about 1 sec-
ond.
L1
L2
L3
PRG
value
L1
L2
L3
PRG
Address
L1
L2
L3
Summary of Contents for UMG 96S
Page 17: ...Page 17...
