janitza UMG 605 PRO, User Manual And Technical Data

Page: 31 / 87

www.janitza.de
UMG 605-PRO
26
7. 4 Bus structure
• All devices are connected in a bus
structure (line).
• Up to 32 participants can be connected
together in a single segment.
• The cable is terminated with resistors
at the beginning and at the end
of a segment.
• If there are more than 32 participants,
repeaters (amplifiers) must be used
to connect the individual segments.
• Devices for which the bus connection
is switched on must be under current.
• It is recommended that the master
be placed at the end of a segment.
• If the master is replaced with a bus
connection, the bus must be switched off.
• Replacing a slave with a bus connection
that is either switched off or de-energised
can destabilise the bus.
• Devices that are not connected
to the bus can be replaced without
destabilising the bus.
Fig. Bus structure illustration
Slave Slave Slave
Slave
Slave Slave Repeater
Slave Slave Slave Slave
Master
Speisung notwendig / power supply necessary
Busabschluß eingeschaltet / bus terminator on T
T
T
T
T