59
www.janitza.de
RCM 202-AB
RCM 202-AB
59
ATTENTION
Set the “Term” switch according to the removed device.
If required, push the “Term” switch to the right.
Connect the current measurement transformer to the plug of the respective
current measurement input (I1 and I2). Observe also the connections K and
L.
Open the short-circuited transformer disconnect terminal blocks.
Connect the analog and digital outputs if necessary.
Make sure that the connected connectors are still firmly seated.
Connect the plug for the power supply to the N/L connection. The RCM 202-
AB is ready for operation. The LED lights up green and the text messages
display the current operating status of the monitored system.
If necessary, configure the RCM 202-AB according to the system to be mon-
itored and depending on the circuit of its connections.
15
Warranty and liability
The general terms and conditions of Janitza electronics GmbH apply in the currently
valid version.
16 Storage
Temporary storage of the device may only take place in enclosed spaces with ob-
servance of the storage temperature. Furthermore, the device is to be stored pro-
tected against direct effects of dust-, moisture and water.
17 Disposal
The device must be disposed of according to the applicable national and
international regulations.
In Germany, the device is to be recycled as an electrical device. It may not
be disposed with the household waste or as residual waste.
Used devices are taken back and disposed by Janitza electronics GmbH
upon request.
Summary of Contents for RCM 202-AB
Page 2: ...2 RCM 202 AB www janitza de...
Page 6: ...6 RCM 202 AB www janitza de...
Page 66: ...66 RCM 202 AB www janitza de...
Page 67: ...67 www janitza de RCM 202 AB...
