janitza RCM 202-AB, User Manual And Technical Data

Page: 8 / 68

8
RCM 202-AB
www.janitza.de
8 RCM 202-AB
2 Safety instructions
2.1 Symbols used
WARNING
These symbols and the word “warning” are used when there is possible
danger to life and limb.
Symbols are also used in these instructions that refer directly to the source
of danger.
ATTENTION
This symbol and the word “attention” are used when there is the possibility
of property damage.
Observe the user manual!
This symbol and “Observe the user manual!” are used when reference must
be made to the user manual or other documentation.
NOTE
This symbols and the word “Note” are used to make reference to additional
information necessary for device use.
2.2 General safety instructions
The following safety instructions must be observed for work on and with the RCM
202-AB. Specific safety instructions are also listed in the respective chapters.
WARNING
All work necessary for the connection, assembly, commissioning and oper-
ation of the device may only be performed by well trained and instructed
specialist personnel. The specialist personnel must observe and comply
with the relevant applicable standards and directives for work on electrical
systems (e.g. DIN EN 50110 and ff./ directives and regulations of profes-
sional associations in Germany).