janitza RCM 202-AB, User Manual And Technical Data

Page: 30 / 68

30
RCM 202-AB
www.janitza.de
30 RCM 202-AB
11 Operation
11.1 Release and block of parameterization mode
Release of parameterization mode
Initial situation: The RCM 202-AB is in normal mode, the “main screen” appears
on the display.
Press . The main menu opens and menu item “1.Basic settings” is dis-
played with a dark background.
Press again. The menu “1.Basic settings” is opened.
Use or to select the menu item “Parameter release”. The “Pa-
rameter release” menu item is displayed with a dark background.
Press . The “Parameter release” view appears.
Set the number using or and confirm each number with .
The password is a 6-digit number sequence. The factory setting is “000000”.
Input and confirmation of the correct number sequence
The symbol on the display changes to . Parameterization mode is now
active, which means that values can be changed and saved. The main screen
appears again if no key is pressed for 60 seconds. Parameterization mode is
blocked after an additional 60 seconds without pressing a key.
Input and confirmation of an incorrect number sequence
Parameterization mode is not released, which means that values cannot be
changed or saved.
Press . Menu “1.Basic settings” is displayed again and menu item “LCD
contrast” is displayed with a dark background.
Parameter release
0 . * * * * *
Parameter release
Parameter released!
Parameter release
* * * * * *
Parameter not released!