GigE Series Camera Serial Commands
TM/
TMC/RM/RMC-2030GE
- 27 -
Table 5. Command Responses
Command
Parameter
End of Cmd
Ack. Response
Description
:CCS=
X
<cr>
:o<cr>
Select Camera Control signals (X = 0
CL Conn, X = 1 Hirose Conn)
:TAH=
X
<cr>
:o<cr>
External Trigger Polarity (X = 1
Active High, X = 0 Active Low)
:TPTN
X
<cr>
:o<cr>
Enable/Disable Test Pattern (X = 1
Enable, X = 0 Disable)
:CAM?
<cr>
:o[model]<cr>
Inquire Camera Model
:VER?
<cr>
:o[version]<cr>
Inquire MPU firmware version
Note: If a command is not accepted for any reason, the camera will return a “nack” response. “:e” <cr>
*Not available yet.
Command
Parameter
End of Cmd
Description
Byte 1, 2
Master Gain
Master Gain (H'0000 - H'0FFF: -3dB - +12dB)
Byte 3, 4
R Channel Fine
Gain
R Channel Fine Gain (H'0000 - H'0FFF)
Byte 5, 6
Master Offset
Master Offset (H'0000 - H'0FFF)
Byte 7, 8
R Channel Fine
Offset
R Channel Fine Offset (H'0000 - H'0FFF)
Byte 9
Function Flag 0
Bit 0
Rsvd
Bit 1
Rsvd
Bit 2
Rsvd
Bit 3
Rsvd
Bit 4
Rsvd
Bit 5
Rsvd
Bit 6
Pixel Output
Order 0
00=<---<--- 01<=<------>
10=<<------
Bit 7
Pixel Output
Order 1
Byte 10
Function Flag 1
Bit 0
Shutter 0
Continuous Mode: 0000
Continuous no shutter
Trigger mode: 0 = Async no shutter
Bit 1
Shutter 1
Bit 2
Shutter 2
Bit 3
Shutter 3
1001=PWC 1010=PIV Fixed Exposure
1011=PIV PWC
Bit 4
Shutter Mode 0
00=Continuous Preset Shutter 01=Trigger
Preset Shutter
10=Trigger Programmable Shutter
11=Continuous Programmable Shutter
Bit 5
Shutter Mode 1
Summary of Contents for RM-2030GE
