Software Introduction
TM/
TMC/RM/RMC-2030GE
- 5 -
Figure 5.
Select Camera Window
5. Go to the
Acquisition
tab and click
Start
. An image stream should appear.
6. Click on the
Configure
button at the bottom of the Coyote screen, and open the
GigE Camera
Software
dialog box. This is your integrated control software.
Note:
The color version (TMC-2030GE) requires that color interpolation be performed
using the host computer’s CPU. In default mode, the camera supports 2 x 2 color
interpolation. For better color performance, the user can select 3 x 3 interpolation
in the Camera Interface Application. Return to the
Acquisition
tab of the
Coyote
(previous) screen, and click
Configure
. In the
Advanced Configuration Window
,
select the
Pixel Type
tab. Make sure the camera is set to the proper color space and
pixel depth, and then click the check-box labeled
Use 3 x 3 Bayer Interpolation
in
the
Conversion Options
panel. More information on color interpolation and the
color filter array (CFA) can be found in Section 10.2 on page 50 of this manual.
Summary of Contents for RM-2030GE
