JAI AM-800GE, User Manual

Page: 82 / 111

AM-800GE / AB-800GE
- 79 -
The following table shows examples of values which can be read out by the TMPO
command.
The display resolution in the JAI camera control tool is 1 ºC.
12. Examples of operation using JAI Control Tool
For more details regarding the JAI control Tool, please refer to the Operation manual
provided in the JAI SDK.
12.1. About GenICam
TM
SFNC1.3
The AM-800GE and AB-800GE are designed as conforming to GenICam SFNC1.3.
GenICam SFNC stands for GenICam Standard Feature Naming Convention. By defining
the standard cases and the standard features, general-purpose software can control
cameras from any manufacturers which conform to the GenICam standard.
JAI, in the past, used traditional feature names in order to maintain naming continuity
with previous cameras.
However, starting with the AM-800GE AND AB-800GE and
after, JAI GigE Vision cameras will now fully comply with GenICam SFNC feature
names.
Accordingly, terminologies used for functions may be different from those used with
previous models. Refer also to chapter 9. Core functions.
12.2. Examples of camera operation
The following explains the operation of the camera using the GenICam SFNC 1.3
Control Tool.
12.2.1 Operational cautions
1. Features shaded gray in the Features Properties cannot be set.
2. If the image size is to be changed, image capturing should first be stopped before
setting the size parameters.
12.2.2 Connecting camera(s)
Connect the camera to the network. If the connection is established, start the JAI
Control Tool. The model name of the connected camera and icon will be displayed
on the screen.
After clicking the icon, the status will change to indicate the camera is successfully
connected to the Control Tool.