JAI AM-800GE, User Manual

Page: 62 / 111

AM-800GE / AB-800GE
- 59 -
10.3.1 TriggerOverlap = OFF
This works as LVAL asynchronous operation.
Binning
Control t1 t2 t3 t4
Off, 2x1 11μs ± 0.05μs 2L (min) 2L 17.8μs ± 0.05μs
1x2, 2x2 14.5μs ± 0.05μs 2L (min) 2L 21.28μs ± 0.05μs
Fig.44 Trigger OberLap = OFF (Trigger width)
10.3.2 TriggerOverlap = Read out
In this mode, if the trigger is input during CCD readout, it works as
LVAL synchronous and if the trigger is input while the CCD is not
reading out, it works as LVAL asynchronous.
Binning Control t1
t2 t3 t4
OFF, 2x1 43.3μs ± 0.05μs 2L (min) 2L 50.1μs ± 0.05μs
1x2, 2x2 46.8μs ± 0.05μs 2L (min) 2L 53.6μs ± 0.05μs
Fig. 45 Trigger OverLap = READOUT (Trigger width
）
t1
Trigger
CCD Exposure
Exposure
Int_FVAL
t3
t4
t2
Exposure Period
Active
Trigger
CCD Exposure
Exposure period
Int_FVAL
Exposure
t2
t3
t4 t1
Active