JAI AM-800GE, User Manual

Page: 67 / 111

AM-800GE / AB-800GE
- 64 -
10.6.1.3 Multi ROI Mode
A maximum of 5 preset ROI images can be taken from one image.
Using this function, the total data can be smaller than a full frame.
Fig 49. Multi ROI
If the Video Send Mode Selector is set to Multi Mode, this function becomes effective.
In the Multi ROI Mode, the following items can be set.
Multi ROI Index
：
This is the index (0-4) to which the setting will be applied
Multi ROI Next Index
：
Indicate the next index to read out
Multi ROI Width
：
Set the horizontal readout width
Multi ROI Height
：
Set the vertical readout lines
Multi ROI Offset X
：
Set the horizontal offset
Multi ROI Offset Y: Set the vertical offset
Each ROI can be overlapped.
Note: If Binning Horizontal/Vertical mode is set from OFF to ON after ROI size is
determined, the area setting value is automatically changed to a half of the value.
However, if Binning Horizontal/Vertical mode is set from ON to OFF, the area setting
value is not changed automatically. It should be set manually.
10.6.2 Delayed Readout Mode (JAI Custom Control)
If multiple cameras need to be simultaneously triggered by one trigger pulse, this
function can be used in order for the Ethernet bandwidth to accommodate the added
traffic without conflicts. Refer to the chapter 8.4 too.
ROI
1
ROI 2
ROI
3
ROI 4
ROI 5